To ensure your workplace exemplifies the highest standard of safety when it comes to respiratory protection, consider these tips in promoting respiratory safety in the workplace:
Have a written program in place (It’s the law)
In workplaces where respiratory protection is mandated, it is legally required for the municipality to have a written respiratory protection program in place. It must be one of the sections of your Safety and Health Policy and Procedure Manual required by OK Department of Labor’s PEOSH division as per NIOSH regulations (42CFR Part84) . Even if respiratory is simply recommended, writing out an official policy ensures workers have a resource to promote their safety and managers have a document to refer to for suggested protocols and procedures. Finding ways to create safer workplaces should be of utmost importance.
Choose the appropriate type of respirator(s)
OSHA/PEOSH mandates that a company/municipality must do an exposure assessment before choosing a particular type of respirator. This requires identifying what type of airborne contaminants pose a risk (particulate, biological, or chemical), as well as how much of these contaminants a worker can be exposed to. By quantifying these risk factors, employers can then choose the appropriate type of respirator for specific jobs and environments. Remember to take into account the comfort of your workers when wearing respirators for long periods of time. Be aware of medical conditions that may prevent an employee from wearing respiratory masks.
Make sure employees are using respirators properly
If you employees don’t wear respirators correctly or take them off in hazardous environments, then the devices do nothing to protect them. For example, a worker with a full beard or sideburns may not get a good seal. Or an employee that wears glasses may not be able to get a good seal because their respirator is not designed to be worn with glasses. Train employees on when to wear respirators, what kind of respirator is best for them, and make sure they know how to properly adjust the respirator to properly fit for effectiveness and comfort. Fit testing is required by OSHA/PEOSH when respirators are worn. Make sure employees read and understand instructions on new types of respirators to make sure they are wearing and using them properly. Make sure respirators aren’t inhibited by other safety gear like safety glasses and hearing protection.
Make sure maintenance is a priority
Disposable respirators should be discarded after one use and reusable ones require the filter be changed regularly. Employers are responsible for ensuring reusable respirators are properly cleaned, sanitized, stored, and repaired. Respirators should be stored in a clean area in which they will not be exposed to environmental damage. When replacing filters, make sure excess packaging is removed and that the filter is inserted properly.
Have ample replacement respirators and filters available
If your employees rely on reusable respirators, make a point of having plenty of replacement filters available. Besides having ample filters, cartridges, and replacement parts, take time to organize all your supplies so they can be accessed efficiently. Same goes for disposable masks respirators if that is your municipalities preferred method of protection. Keep your supply well stocked and make sure your workers are following your written procedures and using your respirator protection equipment. It will keep them and your organization safer.
