Weeds have a tendency to sprout alongside walkways, buildings, and cemetery headstones on municipal grounds. Few lawn mowers can safely get into these edges and corners as needed to cut weeds and tall grass. A weed trimmer is the best way to reach these spots. Consider the following safety tips for using weed trimmers.
Prepare the site – walk the area to be trimmed prior to starting. Remove debris, sticks, stones, and other obstacles or potential hazards. Make sure there are no people or pets in the area and stay alert to anyone or anything entering your workspace while trimming. Prepare the weed trimmer by checking the safety guards and shields, making sure they are in place. Verify there is enough nylon line in the spool. Fill the fuel tank and always allow the engine to cool down before refueling.
When trimming, keep in mind that lawn trimmers can throw objects at high speeds, so avoid working near people, vehicles, and delicate building structures. Never attempt to adjust or repair a weed trimmer while the engine is running. Keep the line short so it does not extend past the guard on the head of the weed trimmer. Keep one hand on the handle and one hand on the shaft of the trimmer to provide greater control. If provided, use a shoulder strap for support to help with weight and vibration of the weed trimmer. This can help prevent back, shoulder, and arm fatigue or strains. When trimming, keep the throttle at full speed, but be able to maintain control of the trimmer. Swing the trimmer in a slow smooth arcing motion. Move the trimmer forward and step forward to cover more ground. Don’t over extend the trimmer with just your arms or bending forward, as this could cause excess fatigue.
Watch for hidden obstacles like wires, fence posts, rocks, or bricks that could cause the trimmer to bounce backwards or entangle the line and jam the trimmer. This could cause injury to the operator or damage the equipment. Wear work boots, hearing protection, eye and face protection, long pants and long-sleeved shirts to protect your body.
Working outside, other personnel safety precautions include dealing with weather and natural conditions. Consider the following additional safety tips while using weed trimmers. If you are working near a street or roadway, wear a reflective vest. Be aware of nearby traffic and parked vehicles and position yourself so you won’t accidentally throw objects into traffic or vehicles. Don’t listen to music with headphones, as it can be a distraction and add to noise exposure. Use sun block and wear a hat to protect from sun exposure. Use an insect repellant with at least 10% DEET to protect from mosquito and tick bites. Stay hydrated, drinking about 8 ounces of water every 20 minutes. Be able to identify and avoid poisonous plants like poison ivy, poison sumac, and nettles. Watch out for venomous spiders, caterpillars, and snakes. Keep a first-aid kit handy and include EpiPens and a snakebite kit in the kit.
The key to safe operation of weed trimmers varies; select the proper type of weed trimmer for the job. Make sure operators are properly trained to use the equipment. Survey the work area and identify or remove obstacles and hazards. Don’t work around people or pets. Inspect and maintain your equipment frequently and follow the manufacturer’s maintenance and safety instructions. Wear the appropriate personal protective equipment (PPE). Compliance with these safety considerations can help better protect workers, citizens, and the municipality from injury, property damage, and tort claims.
